Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD Professional Manufacturer of High Performance Tungsten Carbide Products
Add to Cart
High Performance Sintered Solid Carbide Gun Drill Rod Blanks Various Size
Solid carbide rod blanks we manufactured has excellent hardness, good straightness, and stable toughness.With high wear / corrosion resistance, suitable for the manufacturing of various kind of solid cemented carbide tools for the machining of heat-resistant alloy and Ti alloy,also suitable for the manufacturing of micro drills used for machining PCB.
We manufacture tungsten carbide rods extruded and pressed.
Diameter from 0.3mm to 40mm,
length in 310mm, 330mm or 340mm, or any size
Grade inYL10.2, K10, K20 K30, K35 or etc.
We offer:
Production Features
Specification
| Material: | tungsten carbide |
| Dimension: | Dia10*75/100/150mm 2.0*330mm various size for choose |
| Ground Tolerance: | h6 based on requirement |
| Blank tolerancce: | +0.3~0.5mm |
| Grade: | K20 K30 K10, YL10.2, YG20 YG10X |
| Production Process: | Power mixing-Pressing-HIP sintering-Blank- Processing- Finished |
| Type: | round rod |
| Surface: | blank or grinding |
| Performance | High hardness, wear /corrosion resistancce, good toughness, good straightness |
| Non-standard or tolerance | can be customized |
Our standard size models:
| Size range(DiaXL mm) | Tolerance | ||
| D(blank, mm) | D (ground, mm) | L(mm) | |
| Dia(0.3-0.9)x330 | +0/+0.3 | h6/h7 | 0/+2 |
| Dia(1-5)x330 | +0.3/+0.4 | h6/h7 | 0/+2 |
| Dia(6-20)x330 | +0.3/+0.6 | h6/h7 | 0/+2 |
| Dia(21-40)x330 | +0.5/1.0 | h6/h7 | 0/+3
|
| For any other sizes, we are able to custom-made according to clients’ requirements or drawings. | |||
Carbide Rod Grade Information
Carbide Rods Grades for Cutting Tools
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG6X | K10 | 94 | 6 | 0.6-0.8 | 14.9 | 92 | 2000 | Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron |
| YL10.2 | K25-K35 | 90 | 10 | 0.6-0.8 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG8 | K30 | 92 | 8 | 1.2 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YG6 | K20 | 94 | 6 | 1.2 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. |
| YG15 | 85 | 15 | 1.6 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies | |
| YG20 | 80 | 20 | 1.6 | 13.7 | 85 | 2500 |
suitable for stamping dies such as screw, watch parts
| |
| YG20C | 80 | 20 | 1.8-2 | 13.6 | 82 | 2200 | suitable for colding heading dies, stamping dies such as shaft ,standard parts |
| Grade | ISO Grade | Density g/cm3 | Hardness HRA | T.R.S N/mm2 | Application |
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Suitable for heavy duty cutting of steel and cast steel and for a low-speed and medium-speed and a big feed-rate roughing operation under unfavorable machining conditions |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Suitable for semi-finishing and finishing machining of steel and cast steel, using a medium feed-rate |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and cast steel and a medium feed-rate and a rather high cutting speed is to be recommended |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Suitable for heavy duty cutting of steel and cast steel with a possible big feed-rate and for face milling as well. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Suitable for semi-finishing and finishing of stainless and ordinary alloyed steel |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Suitable for semi-finishing and finishing of stainless and low alloyed steel, mainly used for machining of trains' wheel hubs |
Our tungsten Carbide Rod Type
1. Blank standard tungsten carbide Rod
2. Ground tungsten carbide rod
3. fixed length tungsten carbide rod
4. tungsten carbide rod with central hole
5. customized tungsten carbide round bar
For more detail size,pls email us,thanks