Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD Professional Manufacturer of High Performance Tungsten Carbide Products
Add to Cart
Grade and Applications:
| Grade | Density (g/cm3) |
TRS (N/mm2) |
Hardness (HRA) |
Application |
| K01 | 14.9-15.3 | ≥1180 | ≥90.5 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. |
| K01 | 15.1-15.4 | ≥1300 | ≥91.5 |
The grade can be used for the semi-finishing of stainless steel of railway wheel hubs. |
| K10 | 14.8-15.1 | ≥1560 | ≥91.0 |
Suitable for the finihing and semi-finishing if steel and cast steel with a moderate feed rate and a rather high cutting speed. |
| K10 | 14.7-15.1 | ≥1580 | ≥91.0 |
Suitable for the finishing and semifinishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel. |
| K20 | 14.7-15.1 | ≥1670 | ≥89.5 |
Suitable for the heavy duty rough tuming of steel and cast steel with a big feed rate at a medium and low speed under |
| K20-k30 | 14.6-14.9 | ≥1840 | ≥89 |
Suitable for steel, cast steel, manganese steel, grey cast iron, medium cutting speed and feed rate by half finishing and semi-finishing end mills. |
| P10 | 11.1-11.6 | ≥1180 | ≥91.0 | Used for the milling of steel, cast steel ans alloy steel. |
| P20 | 11.2-11.8 | ≥1270 | ≥90.5 | Used for the milling of steel, cast steel ans alloy steel. |
| P30 | 12.5-13.8 | ≥1430 | ≥89.5 |
Suitable for the heavy duty turning of steel and cast steel with a big steel rate under unfavorable working condifion. |
| M10 | 12.7-13.5 | ≥1180 | ≥91.5 |
Suitable for the heavy duty turning of steel and cast steel with a big steel rate under unfavorable working condifion. |